Accent Color Orange Brown 87209: Panel Lining Guide
By Panda Hobby - Canada's Largest Gundam Store | Published: 2026-10-28
Category: How-to Guides
Learn how to use Accent Color Orange Brown 87209 for panel lining and weathering. Step-by-step wash technique tips for realistic model detailing.
Quick Answer
Use Tamiya Accent Color Orange Brown 87209 as a panel liner and weathering wash. It flows into recesses, creating realistic shadows and rust effects on tanks, mecha, and figures.
Why Orange Brown Works for Panel Lining
Orange brown is a versatile shade that mimics rust and dirt. It adds depth to panel lines and surface details without looking stark or unnatural, especially on warm-toned or earth-colored models.
The pre-thinned formula is ready to use. You can apply it directly from the bottle, saving time and ensuring consistent results.
Trade-offs to Keep in Mind
Because it's enamel-based, the accent color can craze bare plastic if applied too thickly. Always test on a sprue or underside of a part first.
It's not a replacement for a dedicated panel liner on glossy surfaces; a gloss coat before application will improve flow and cleanup.
Step-by-Step Panel Lining with Accent Color Orange Brown
- Prepare the surface: Ensure the plastic is clean and free of dust or grease. If the kit is unpainted, apply a gloss coat to protect the plastic and help the accent color flow. Skipping the gloss coat on bare plastic can cause the enamel to craze or stain the surface.
- Shake the bottle well: The pigment settles over time. Shake the bottle thoroughly for about 30 seconds to ensure the color is evenly mixed. Insufficient shaking can result in uneven color strength and poor flow.
- Apply the accent color: Use the fine brush tip to touch the panel line or crevice. Capillary action will draw the paint along the line. Work in small sections to control the flow. Don't overload the brush; excess paint can flood the surface and require extra cleanup.
- Let it dry: Allow the accent color to dry completely. This typically takes 15-30 minutes, but thicker applications may take longer. Do not rush with heat, as it can cause cracking. Patience prevents smudging and ensures crisp lines.
- Clean up excess: Dampen a cotton swab or cloth with enamel thinner or lighter fluid. Gently wipe away any paint that flowed outside the lines. Work in one direction to avoid smearing. Use a clean swab for each pass to avoid spreading the paint further.
- Seal your work: After the accent color is fully dry and cleaned, apply a matte or flat clear coat to protect the panel lining and give the model an even finish. Sealing prevents the weathering from being accidentally rubbed off during handling.
Product Facts
- Accent Color - Orange Brown 87209: This is the best stain paint for weathering tank models. The color is orange-brown. It can also be used to express rust in deep parts, rust on tracks, rust that has flowed, and even as an accent on the skin of figures. Its versatility makes it a single-bottle solution for both panel lining and weathering, ideal for adding realistic grime and rust to your builds.
Accent Color - Orange Brown 87209
