Quick Answer
For smoothing scratches, holes, and gaps on plastic models, apply Tamiya Liquid Surface Primer 87075 directly with a brush, or thin it with Tamiya Lacquer Thinner for airbrushing. This guide walks you through both methods and the key steps to get a smooth, paint-ready surface.
Why Use a Liquid Primer?
Unlike spray primers, a liquid primer gives you more control over coverage and build-up. You can apply it precisely to small areas or fill fine imperfections before painting. It also acts as a strong base layer that helps your paint adhere better and prevents the plastic from showing through.
Tamiya's Liquid Surface Primer is especially useful for model kits where you need to hide seam lines or fix small surface defects. Because it's a lacquer-based formula, it dries quickly and sands smoothly, saving you time in your preparation routine.
Brush vs. Airbrush: Which Should You Choose?
Brushing is the simplest approach: just open the bottle and apply the primer directly. It's perfect for small touch-ups or when you only need to cover a small area. However, brush strokes can be visible if you apply too thick a coat, so you need to work in thin layers.
Airbrushing gives a more uniform finish and is better for covering large surfaces. You'll need to thin the primer with Tamiya Lacquer Thinner to achieve the right consistency. This method requires more setup but produces a smoother, more professional result.
Step-by-Step Application Guide
- Prepare the surface: Clean the plastic parts with warm soapy water or a mild solvent to remove mold release agents and fingerprints. Let them dry completely. Skipping this step can cause the primer to bead up or not adhere properly.
- Shake the bottle well: Shake the Tamiya Liquid Surface Primer bottle thoroughly for at least a minute to ensure the pigment is evenly dispersed. This is crucial for consistent color and coverage. Insufficient shaking can lead to thin spots or a gritty texture.
- Apply with a brush (for small areas): Dip a clean modeling brush into the primer and apply a thin, even coat over the areas you want to smooth. Work quickly to avoid brush marks, and let each coat dry before adding another. Thin coats are better than one thick coat—thick layers can obscure fine details and take longer to cure.
- Thin for airbrush (for large areas): Mix Tamiya Liquid Surface Primer with Tamiya Lacquer Thinner at roughly a 1:1 ratio (or as needed) and pour into your airbrush cup. Apply in light, even passes, keeping the airbrush moving to avoid pooling. Test the consistency on a scrap piece first—if it spatters, add more thinner; if it's too runny, add more primer.
- Let it cure completely: Allow the primer to dry and cure for at least 30 minutes to an hour, depending on humidity and thickness. The surface should feel dry to the touch and not tacky. Rushing to sand or paint before full cure can cause the primer to lift or smear.
- Sand and smooth: Once cured, lightly sand the primed surface with fine-grit sandpaper (e.g., 800-1000 grit) to remove any imperfections and create a smooth base for painting. Wipe away dust with a tack cloth. Be gentle—over-sanding can expose bare plastic and require another coat of primer.
- Check and repeat if needed: Inspect the surface under good lighting. If you still see scratches or gaps, apply another thin coat and repeat the sanding step. When the surface is uniform, you're ready to paint. A smooth primer coat is the key to a professional-looking final paint job.
Product Facts
- Tamiya Liquid Surface Primer 40ml 87075: Tamiya's Liquid Surface Primer is perfect for smoothing over small scratches, holes, and gaps, and can be easily applied with a modeling brush. It can also be thinned with Tamiya Lacquer Thinner and applied with an airbrush. This versatility means you can use the same product for both quick brush touch-ups and full airbrush priming, making it a flexible addition to your modeling toolkit.

Tamiya Liquid Surface Primer 40ml 87075

