Using AK Paneliner for Grey and Blue Camouflage
By Panda Hobby - Canada's Largest Gundam Store | Published: 2026-10-25
Category: How-to Guides
Learn how to apply AK Paneliner for grey and blue camouflage on scale aircraft models. This guide covers preparation, application, and cleanup for crisp panel lines.
Quick answer
For grey and blue camouflage schemes, AK2072 Paneliner provides a controlled enamel wash that flows into recessed lines without staining the base paint. Apply over a gloss coat, let it wick, then clean with thinner.
Why use a dedicated panel liner for grey and blue schemes
Standard dark washes can look harsh on light grey or blue aircraft surfaces. AK2072 is formulated with a neutral grey tone that creates depth without overpowering the camouflage colors.
The enamel formula self-levels and dries slowly, giving you time to correct mistakes. It works best on gloss-coated surfaces because the capillary action pulls the liner into panel lines instead of staining the flat paint.
Step-by-step application process
- 1. Prepare the surface: Apply a gloss clear coat (like AK Interactive Gloss Varnish) over your grey or blue camouflage paint. Let it cure fully for at least 24 hours. A smooth glossy surface prevents the panel liner from staining the base color. Common mistake: applying liner over a matte surface causes staining that is difficult to remove.
- 2. Apply the panel liner: Shake AK2072 thoroughly. Use the built-in brush to touch the tip to panel lines and recesses. Capillary action will draw the liner along the line. Work in small sections to keep the liner wet while you apply. Checkpoint: don't flood the surface. A small drop at each intersection is enough.
- 3. Let it dry partially: Wait 10–15 minutes until the liner becomes tacky but not fully hard. This allows the enamel to settle into the recesses while remaining removable on flat surfaces. Common mistake: cleaning too early lifts the liner out of the panel lines; cleaning too late requires stronger solvents that may damage the base coat.
- 4. Clean the excess: Dip a clean cotton swab or lint-free cloth in AK Interactive Enamel Thinner or odorless mineral spirits. Gently wipe across the surface perpendicular to the panel lines. Rotate the swab to a clean side after each pass. Checkpoint: if the liner smears, the surface may not be glossy enough or the liner may be too dry.
- 5. Seal the work: Once the panel liner is fully dry (at least 1 hour), apply a final clear coat—matte, satin, or gloss—to protect the panel lines and unify the finish. Common mistake: skipping the seal coat can cause the enamel liner to react with future weathering layers.
Product used in this guide
- AK2072 Paneliner for grey and blue camouflage: Enamel product developed for scale aircraft models with improved flow for easy creation of depth and emphasis of surface detail. The improved flow means the liner naturally wicks into panel lines and rivets, reducing the need for manual brushing and cleanup.
AK2072 Paneliner for grey and blue camouflage
