Back to Blog
How-to Guides 2026-11-20 Panda Hobby - Canada's Largest Gundam Store 0 views

How to Use AK Brown Streaking Grime for Red Hulls

How to Use AK Brown Streaking Grime for Red Hulls

Learn how to apply AK304 Brown Streaking Grime to create realistic dirt streaks on red ship hulls and other models.

What Is AK304 Brown Streaking Grime For?

AK304 Brown Streaking Grime is an enamel weathering product designed to represent dirt streaks on ship hulls painted with red primer. While its primary use is for naval models, it can also be applied to other red surfaces, such as the hull of a tank. The brown color contrasts well with red, creating a natural, grimy look that adds depth and realism to your model.

How to Apply AK304 Brown Streaking Grime

The following steps are based on the manufacturer's instructions supplied with the product.

  1. 1. Shake the bottle well: Before use, shake the AK304 bottle thoroughly to ensure the pigment is evenly mixed.
  2. 2. Apply the grime in vertical streaks: Using a fine pointed brush, apply the streaking grime in irregular vertical lines from the upper parts of the hull sides. This mimics how dirt and oil would naturally run down the surface.
  3. 3. Let it dry for about 10 minutes: Allow the paint to dry for approximately 10 minutes. This wait time lets the enamel set slightly, making the next step easier to control.
  4. 4. Soften the streaks with White Spirit: Moisten a flat brush with White Spirit (not included). Gently swipe the brush over the streaks with light pressure to soften the effect and create a natural, blended look.

AK304 at a Glance

  • AK304 Brown Streaking Grime for Red Hulls: Enamel product designed for streaking dirt effects on red-primed ship hulls. The enamel formulation allows for easy manipulation and blending, giving you control over the weathering intensity.
    AK304 Brown Streaking Grime for Red Hulls
    AK304 Brown Streaking Grime for Red Hulls
  • AK304 Brown Streaking Grime for Red Hulls: Can also be used on other red surfaces like tank hulls. This versatility means the product isn't limited to ships—it can be used on any model with a red base coat.

Tips for Better Results

For the most natural look, vary the length and thickness of your initial streaks. Thicker streaks near the top and thinner ones toward the bottom can simulate gravity-driven grime. Use a clean brush for each pass when softening to avoid smearing dirt where you don't want it. Practice on a scrap piece first if you're new to enamel weathering.

What the Supplied Information Does Not Cover

The catalog does not specify drying times between coats, compatibility with specific topcoats, or safety precautions beyond general enamel handling. Always work in a well-ventilated area and test on a spare part before applying to your final model.

Related Articles

Customer Service
Home
Products
Cart
Profile