Back to Blog
How-to Guides 2026-11-20 Panda Hobby - Canada's Largest Gundam Store 0 views

Using Acrysion N68 RLM74 Gray Green for Aircraft Models

Using Acrysion N68 RLM74 Gray Green for Aircraft Models

Learn how to use Acrysion N68 RLM74 Gray Green (Semi-Gloss) for aircraft models. Covers brush and airbrush application, thinning, and where this Luftwaffe color fits.

What Makes Acrysion N68 RLM74 Gray Green Useful for Aircraft Models

Acrysion N68 RLM74 Gray Green is a semi-gloss acrylic paint from Mr. Hobby’s Acrysion line. Its color corresponds to the Luftwaffe RLM 74 specification, a gray-green that appeared on late-war German aircraft cockpits, interior components, and some exterior camouflage patterns. For modelers building 1/48 or 1/32 scale Bf 109s, Fw 190s, or jet prototypes like the He 162, this shade reduces the need for mixing to match historical references.

The paint is labeled semi-gloss, which gives a subtle sheen closer to factory-fresh painted metal than a flat or high-gloss finish. That makes it a practical choice for cockpit interiors and wheel wells where the original finish had some lustre but wasn’t polished.

Acrysion N68 RLM74 Gray Green at a Glance

  • Acrysion N68 - RLM74 Gray Green (Semi-Gloss/Aircraft): Acrysion N68 is a water-based acrylic paint that can be used for both brush painting and airbrush painting. Drying speed is faster than existing water-based hobby colors, improving work efficiency. Faster drying means you can layer coats or mask adjacent areas sooner, which is helpful when painting multiple small parts in a single session.
    Acrysion N68 - RLM74 Gray Green (Semi-Gloss/Aircraft)
    Acrysion N68 - RLM74 Gray Green (Semi-Gloss/Aircraft)
  • Acrysion N68 - RLM74 Gray Green (Semi-Gloss/Aircraft): Tap water can be used to dilute the paint, but the manufacturer recommends using the dedicated thinner to retain 100% of original paint performance. If you thin with tap water, the paint will still spray or brush acceptably, but for consistent flow and film strength — especially on large surfaces — the dedicated thinner is the safer choice.

How to Apply Acrysion N68 RLM74 Gray Green

The following steps are based on the paint’s known properties. Work in a well-ventilated area and test on a spare part first.

  1. Prepare the surface: Clean the plastic or resin surface with mild soapy water to remove mold release. For best adhesion, apply a primer suited for acrylic paints. Mr. Hobby’s own primers work well, but any quality acrylic primer will do.
  2. Stir thoroughly before use: Acrysion paints can settle. Stir the bottle with a clean stick or use a shaker until the pigment is evenly suspended. Do not shake vigorously if using an airbrush — let bubbles settle before pouring.
  3. Thin for your tool: For brush painting, use the paint straight from the bottle or add a drop of water if it feels too thick. For airbrushing, thin with the dedicated Mr. Hobby Acrysion thinner at a ratio of about 2:1 (paint to thinner) or as needed for your airbrush setup. Tap water works but may reduce flow consistency.
  4. Apply thin coats: Apply one light coat, let it dry for a few minutes, then apply a second coat. The faster drying time means you can recoat sooner than with older water-based hobby paints. Avoid heavy wet coats to prevent pooling and uneven sheen.
  5. Clean up promptly: Clean brushes and airbrush cups with water or the dedicated thinner before the paint dries. Dried acrylic is harder to remove.

Where RLM74 Gray Green Fits in Your Luftwaffe Build

RLM 74 was used on many German aircraft from 1944 onward. Common applications include cockpit frames, seat buckets, control stick bases, and rear bulkheads. For exterior camouflage, RLM 74 sometimes appeared as a base color on late-war fighters and night fighters, often mottled with RLM 75 (gray-violet) or RLM 76 (light blue-gray).

If you are painting a 1/48 scale Bf 109G-10 or Fw 190D-9 cockpit, Acrysion N68 gives you a single-bottle match for the interior green-gray. For exterior use, consider whether your subject calls for a semi-gloss finish or if you need to seal it with a flat clear coat to match weathered paint.

What the Supplied Information Does Not Cover

The catalog confirms the paint’s dual brush/airbrush capability, faster drying, and thinning options, but does not include specific drying times, recommended PSI for airbrushing, or instructions for mixing with other Acrysion colors. Test your own workflow on scrap plastic before committing to the final model.

  • Drying time: Faster than older water-based hobby paints, but exact minutes depend on temperature, humidity, and coat thickness.
  • Compatibility with lacquer or enamel topcoats: Not confirmed in the supplied evidence. If you plan to seal with a non-acrylic clear coat, test on a painted spoon first.
  • Color matching to specific aircraft: RLM 74 varied between manufacturers. This paint is a modern interpretation; compare to reference photos for your specific subject.

Related Articles

Customer Service
Home
Products
Cart
Profile